User's Manual

第五章：BIOS 程序設置
5-38
5.5.2 BMC 網絡設置（BMC network configuration）
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
Server Mgmt
Select to congure LAN
channel parameters
statically or dynamically(by
BIOS or BMC). Unspecied
option will not modify any
BMC network parameters
during BIOS phase
BMC network conguration
DM_KAN1
DM_LAN1 IP Address in BMC: 192.168.001.001
DM_LAN1 Subnet Mask in BMC: 255.255.255.000
DM_LAN1 Gateway Address in BMC : 000.000.000.000
DM_LAN1 MAC Address in BMC: 00.CE.01.87.72.A0
DM_LAN1 Address Source in BMC: Static Mode
Conguration Address source [Previous State]
Lan1
Lan1 IP Address in BMC: 192.168.001.002
Lan1 Subnet Mask in BMC: 255.255.255.000
Lan1 Gateway Address in BMC: 000.000.000.000
Lan1 MAC Address in BMC: 00.CE.01.87.72.A0
Lan1 Address Source in BMC: Static Mode
Conguration Address source [Previous State]
→←: Select Screen
↑↓: Select Item
Enter: Select Item
+/-: Change Opt.
F1: General Help
F2: Previous Values
F5: Optimized Defaults
F10: Save & Exit
ESC: Exit
Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.
Configuration Address source [Previous State]
選擇設置的網絡通道的參數為靜態或動態（通過 BIOS 或 BMC）。未指
定選項將不會修改在 BIOS 裡的任何 BMC 網絡參數。設置值有：[Previous
State] [Static Mode] [DHCP Mode]
以下的選項只當您將
Configuration Address source
設為 [Static
Mode] 時才會顯示。
Station IP address [0.0.0.0]
提供您輸入靜態 IP 地址。
Subnet mask [0.0.0.0]
提供您輸入子網絡遮罩的 IP 地址。
Gateway IP address [0.0.0.0]
提供您設置網關器的 IP地址