User's Manual
Table Of Contents
- 给用户的说明
- 目录
- 使用注意事项
- 用电安全
- 关于本用户手册
- 第一章:系统导览
- 第二章:硬件安装
- 第三章:高级安装
- 第四章:主板信息
- 第五章:BIOS 程序设置
- 5.1 管理、升级您的 BIOS 程序
- 5.2 BIOS 程序设置
- 5.3 主菜单(Main)
- 5.4 高级菜单(Advanced menu)
- 5.4.1 处理器设置(CPU Configuration)
- 5.4.2 CPU 电源管理设置
- 5.4.3 芯片组设置(Chipset Configuration)
- 5.4.4 PCH SATA 设置(PCH SATA Configuration)
- 5.4.5 PCI 子系统设置(PCI Subsystem Settings)
- 5.4.6 Intel TXT(LT-SX) 设置
- 5.4.7 内置网络设置(Onboard LAN Configuration)
- 5.4.8 USB 设置(USB Configuration)
- 5.4.9 Trusted Computing
- 5.4.10 ACPI 设置
- 5.4.11 WHEA 设置
- 5.4.12 APM 设置
- 5.4.13 串口控制面板重新定向
- 5.4.14 ME 子系统(ME Subsystem)
- 5.4.15 既有设备设置(Legacy Devices Configuration)
- 5.4.16 运行时错误记录(Runtime Error Logging)
- 5.5 服务器管理菜单(Server Mgmt menu)
- 5.6 事件记录菜单(Event Logs menu)
- 5.7 启动菜单(Boot menu)
- 5.8 监控菜单(Monitor menu)
- 5.9 安全性菜单(Security menu)
- 5.10 工具菜单(Tool menu)
- 5.11 退出 BIOS 程序(Exit)
- 第六章:磁盘数组设置
- 第七章:安装驱动程序
- 附录

第五章:BIOS 程序設置
5-26
Intel LAN4 Enable [Enabled]
啟用或關閉 Intel LAN4 功能。設置值有:[Disabled] [Enabled]
LAN4 Option ROM Support [Enabled]
設置值有:[Disabled] [Enabled]
5.4.8 USB 設置(USB Configuration)
Enabled Legacy USB support.
Auto option disables legacy
support if no USB devices
are connected. DISABLE
option will keep USB devices
available only for EFI
applications.
USB Conguration
USB Devices:
3Drivers, 1Keyboard, 1 Mouse, 3 Hubs
Legacy USB Support [Enabled]
EHCI Hand-off [Disabled]
Port 60/64 Emulation [Enabled]
USB Hardware Delays and Time-outs
USB transfer time-out [20 sec]
Device reset time-out [20 sec]
Device power-up delay [Auto]
Mass Storage Devices:
AMI Virtual CDROM0 1.00 [Auto]
AMI Virtual Floppy0 1.00 [Auto]
AMI Virtual HDISK0 1.00 [Auto]
USB Ports Conguration
→←: Select Screen
↑↓: Select Item
Enter: Select Item
+/-: Change Opt.
F1: General Help
F2: Previous Values
F5: Optimized Defaults
F10: Save & Exit
ESC: Exit
Legacy USB Support [Enabled]
啟用或關閉支持 Legacy USB 設備。設置值有:[Enabled] [Disabled]
[Auto]
EHCI Hand-off [Disabled]
這是一個解決 0ses 沒有 ECHI 所有權更改應根據由 ECHI 驅動的方式。
設置值有:[Disabled] [Enabled]
Port 60/64 Emulation [Enabled]
啟用 I/O 連接端口 60h/64h 模擬支持。這應該為啟用給 non-USB
aware 0ses的完整 USB 鍵盤既有支持。設置值有:[Disabled] [Enabled]
USB Hardware Delays and Time-outs
USB transfer time-out [20 sec]
暫停數值,提供控制、bulk 與中斷傳輸。設置值有:[1 sec] [5 sec] [10
sec] [20 sec]
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
Advanced
Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.