User Manual
➋
inner rail
middle rail
outer rail
Click!
Click!
➊ Pull tab forward and take out inner rail.
➋ Push and slide middle rail back.
* Please repeat installation steps for the other side.
* Please repeat the detached steps for the other side.
Copyright © 2021 King Slide. All Rights Reserved
Remove the inner rail
Check hole type on rack post
Install the inner rail onto the chassis
Fix the outer rail/bracket assembly to the frame
●iDetach nner rail from standoff
●i
●b rpDetach racket from ack ost●b rp
1 2
3
4
White
➊ Key Hole .①-⑥
➋ Screw Hole.
Pull
②
lide inner rail forward to
remove inner rail.
Pull the latch upward and remove the keyhole
from standoff and s
Front bracket
→Click Pull.
Front bracket
**Check hole type on rack post. Choose suitable pin of
bracket to install if needed.
Rear bracket
Ⓐ
M4x4L-P0.7
Ⓑ 6-32x4L
Rear bracket
⑥
⑤
②
④
①
③
Front bracket
➎
➍
➏
Push
Rear bracket
➊
➋
Push
Push
Push
➌
Ⓖ
Ⓘ
9.5 ( )
7.1
5
Square Hole
Round Hole
Pre-installed
(Pre-Installed)
Ⓒ
M Bracket Screw
For 9.5 Square hole frame : Install slide rail as usual.
For 7.1 Round hole frame Please refer to the manual Replacing the suitable pin.::
①
②
③
①
Loosen screw.
Choose by
chassis spec
①
②
③
④
Ⓖ
Ⓒ
Ⓘ
Ⓖ
Ⓒ
Ⓐ M4x4L-P0.7
Inner rail
Ⓑ #6-32x4L
Inner rail
Ⓒ Round hole pin
For Ø7.1 Round Hole
Ⓓ #10-32x13L
For #10-32 Thread Hole
Ⓔ M5x9.0L-P0.8
For Shipping
Ⓕ M3x4.0L-P0.5
For CMA BKT
SCREW SACK
Electronic File
R