User Manual

5-31
RS720Q-E10-RS8U
Set PMem Host Alert Policy for DPA Error [Poison]
Allows you to congure to signal Poison or Viral upon receiving DIMM Physical Address
Error.
Conguration options: [Poison] [Viral]
IIO Error Enabling
IIO/PCH Global Error Support [Enable]
Allows you to enable or disable IIO/PCH Global Error Support.
Conguration options: [Disable] [Enable]
The following item appears only when
IIO/PCH Global Error Support
is set to
[Enable]
.
Os Native AER Support [Disable]
Select FFM or OS native for AER error handling. If OS native is selected, BIOS also
intialize FFM rst until handshake, which depends on OS capability.
Conguration options: [Disable] [Enable]
IIO Error Registers Clear [Enable]
Allows you to enable or disable Clear IIO Error Registers.
Conguration options: [Disable] [Enable]
PCIe Error Enabling
Corrected Error [Enable]
Enable & escalate Correctable Errors to error pins.
Conguration options: [Disable] [Enable]
Uncorrected Error [Enable]
Enable & escalate Uncorrectable/Recoverable to error pins.
Conguration options: [Disable] [Enable]
Fatal Error Enable [Enable]
Enable & escalate fatal errors to error pins.
Conguration options: [Disable] [Enable]
Error Control Setting
Patrol Scrub Error Reporting [UCNA]
Allows you to select the Patrol Scrub Error type selection.
Conguration options: [UCNA]
2LM Correctable Error Logging in m2mem [Enable]
Allows you to enable or disable 2LM correctable error logging in m2mem.
Conguration options: [Disable] [Enable]
Latch First Corrected Error in KTI [Disable]
Allows you to enable or disable latch rst corrected error in KTI.
Conguration options: [Disable] [Enable]