User Manual
Table Of Contents
- Safety information
- Chapter 1: Product Introduction
- Chapter 2: Hardware Information
- Chapter 3: Installation Options
- Chapter 4: Motherboard Information
- Chapter 5: BIOS Setup
- 5.1 Managing and updating your BIOS
- 5.2 BIOS setup program
- 5.3 Main menu
- 5.4 Performance Tuning menu
- 5.5 Advanced menu
- 5.5.1 OffBoard SATA Controller Configuration
- 5.5.2 Trusted Computing
- 5.5.3 ACPI Settings
- 5.5.4 Redfish Host Interface Settings
- 5.5.5 Onboard LAN Configuration
- 5.5.6 Serial Port Console Redirection
- 5.5.7 SIO Common Setting
- 5.5.8 SIO Configuration
- 5.5.9 PCI Subsystem Settings
- 5.5.10 USB Configuration
- 5.5.11 Network Stack Configuration
- 5.5.12 CSM (Compatibility Support Module)
- 5.5.13 NVMe Configuration
- 5.5.14 APM Configuration
- 5.5.15 Intel(R) Virtual RAID on CPU
- 5.5.16 Third-party UEFI driver configurations
- 5.6 Platform Configuration menu
- 5.7 Socket Configuration menu
- 5.8 Event Logs menu
- 5.9 Server Mgmt menu
- 5.10 Security menu
- 5.11 Boot menu
- 5.12 Tool menu
- 5.13 Save & Exit menu
- Chapter 6: RAID Configuration
- Chapter 7: Driver Installation
- Appendix
5-39
RS720Q-E10-RS8U
Port 0/DMI
Settings related to PCI Express Ports (0/1A/1B/1C/1D/2A/2B/2C/2D/3A/3B/3C/3D/4A4
B/4C/4D/5A/5B/5C/5D)
Link Speed [Auto]
Choose the Link Speed for this PCIe port.
Conguration options: [Auto] [Gen 1 (2.5 GT/s)] [Gen 2 (5 GT/s)] [Gen 3 (8
GT/s)]
The following item appears only when
Link Speed
is set to
[Auto]
,
[Gen 2 (5 GT/s)]
, or
[Gen
3 (8 GT/s)]
.
PCI-E Port DeEmphasis [-6.0 dB]
De-Emphasis control (LNKCON2 [6]) for this PCIe port.
Conguration options: [-6.0 dB] [-3.5 dB]
PCI-E Port Clocking [Common]
Congure port clocking via LNKCON [6]. This refers to this component and
the down stream component.
Conguration options: [Distinct] [Common]
PCI-E Port Clock Gating [Enable]
Allows you to enable or disable Clock Gating for this PCIe port.
Conguration options: [Disable] [Enable]
Data Link Feature Exchange [Enable]
Allows you to enable or disable data link feature negotiation in the Data
Link Feature Capabilities (DLFCAP) register.
Conguration options: [Disable] [Enable]
DMI Port MPSS [Auto]
Congure Max Payload Size Supported in PCIe Device Capabilities
register. If default value is not used make sure MPSS in PCH root ports is
updated to the same or smaller value.
Conguration options: [128B] [256B] [Auto]
PCI-E Port D-state [D0]
Set to D0 for normal operation, D3Hot to bi in low-power state.
Conguration options: [D0] [D3Hot]
PCI-E ASPM Support [Disable]
Allows you to enable or disable ASPM (L1) support for the downstream
devices.
Conguration options: [Auto] [L1 Only] [Disable]
The following item appears only when
PCI-E ASPM Support
is set to
[Auto]
or
[L1 Only]
.
PCI-E Port L1 Exit Latency [8uS - 16uS]
The length of time this port requires to complete transition from L1 to L0.
Conguration options: [<1uS] [1uS - 2uS] [2uS - 4uS] [4uS - 8uS] [8uS -
16uS] [16uS - 32uS] [32uS - 64uS] [>64uS]
MSI [Disable]
Conguration options: [Disable] [Enable]
PCI-E Extended Sync [No]
Allows you to enable or disable the Extended Sync Mode (D:x F:0 0:7Ch B:7)
where x is 0-9.
Conguration options: [No] [Yes]