User Manual
Table Of Contents
- Safety information
- Chapter 1: Product Introduction
- Chapter 2: Hardware Information
- Chapter 3: Installation Options
- Chapter 4: Motherboard Information
- Chapter 5: BIOS Setup
- 5.1 Managing and updating your BIOS
- 5.2 BIOS setup program
- 5.3 Main menu
- 5.4 Performance Tuning menu
- 5.5 Advanced menu
- 5.5.1 OffBoard SATA Controller Configuration
- 5.5.2 Trusted Computing
- 5.5.3 ACPI Settings
- 5.5.4 Redfish Host Interface Settings
- 5.5.5 Onboard LAN Configuration
- 5.5.6 Serial Port Console Redirection
- 5.5.7 SIO Common Setting
- 5.5.8 SIO Configuration
- 5.5.9 PCI Subsystem Settings
- 5.5.10 USB Configuration
- 5.5.11 Network Stack Configuration
- 5.5.12 CSM (Compatibility Support Module)
- 5.5.13 NVMe Configuration
- 5.5.14 APM Configuration
- 5.5.15 Intel(R) Virtual RAID on CPU
- 5.5.16 Third-party UEFI driver configurations
- 5.6 Platform Configuration menu
- 5.7 Socket Configuration menu
- 5.8 Event Logs menu
- 5.9 Server Mgmt menu
- 5.10 Security menu
- 5.11 Boot menu
- 5.12 Tool menu
- 5.13 Save & Exit menu
- Chapter 6: RAID Configuration
- Chapter 7: Driver Installation
- Appendix
Chapter 5: BIOS Setup
5-54
Intel® VT for Directed I/O (VT-d)
Intel(R) VT for Directed I/O (VT-d) [Enable]
Allows you to enable or disable the Intel Virtualization Technology for Directed I/O (VT-
d) by reporting the I/O device assignment to VMM through DMAR ACPI Tables.
Conguration options: [Disable] [Enable]
Intel® VMD technology
Intel
®
VMD for Volume Management Device on Socket 0
VMD Config for PCH ports
Enable/Disable VMD [Disable]
Allows you to enable or disable VMD in this Stack.
Conguration options: [Disable] [Enable]
The following items appear only when
Enable/Disable VMD
is set to
[Enable]
.
PCH Root Port 0-19 [Disable]
Allows you to congure PCH root port. Setting this item to
[Enable]
will set
to VMD ownership root port.
Conguration options: [Disable] [Enable]
Hot Plug Capable [Disable]
Allows you to enable or disable Hot Plug for PCIe Root Ports.
Conguration options: [Disable] [Enable]
CfgBar size [25]
Allows you to setup VMD Cong BAR size (in bits Min=20, Max=27), e.g.
20bits=1MB, 27bits=128MB.
Conguration options: [20] - [27]
CfgBar attribute [64-bit prefetchable]
Allows you to setup VMD Cong BAR attribute, like 64-bit or prefetchable.
Conguration options: [32-bit non-prefetchable] [64-bit non-prefetchable]
[64-bit prefetchable]
MemBar1 size [25]
Allows you to setup VMD Memory BAR1 size (in bits Min=20), e.g.
20bits=1MB, 22bits=4MB, 26bits=64MB.
Conguration options: [20] - [39]
MemBar1 attribute [32-bit non-prefetchable]
Allows you to setup VMD Memory BAR1 attribute, like 64-bit or
prefetchable.
Conguration options: [32-bit non-prefetchable] [64-bit non-prefetchable]
[64-bit prefetchable]
MemBar2 size [20]
Allows you to setup VMD Memory BAR2 size (in bits Min=20), e.g.
20bits=1MB, 22bits=4MB, 26bits=64MB.
Conguration options: [20] - [39]
MemBar2 attribute [64-bit non-prefetchable]
Allows you to setup VMD Memory BAR2 attribute, like 64-bit or
prefetchable.
Conguration options: [32-bit non-prefetchable] [64-bit non-prefetchable]
[64-bit prefetchable]