User Manual
Table Of Contents
- Safety information
- Chapter 1: Product Introduction
- Chapter 2: Hardware Information
- Chapter 3: Installation Options
- Chapter 4: Motherboard Information
- Chapter 5: BIOS Setup
- 5.1 Managing and updating your BIOS
- 5.2 BIOS setup program
- 5.3 Main menu
- 5.4 Performance Tuning menu
- 5.5 Advanced menu
- 5.5.1 OffBoard SATA Controller Configuration
- 5.5.2 Trusted Computing
- 5.5.3 ACPI Settings
- 5.5.4 Redfish Host Interface Settings
- 5.5.5 Onboard LAN Configuration
- 5.5.6 Serial Port Console Redirection
- 5.5.7 SIO Common Setting
- 5.5.8 SIO Configuration
- 5.5.9 PCI Subsystem Settings
- 5.5.10 USB Configuration
- 5.5.11 Network Stack Configuration
- 5.5.12 CSM (Compatibility Support Module)
- 5.5.13 NVMe Configuration
- 5.5.14 APM Configuration
- 5.5.15 Intel(R) Virtual RAID on CPU
- 5.5.16 Third-party UEFI driver configurations
- 5.6 Platform Configuration menu
- 5.7 Socket Configuration menu
- 5.8 Event Logs menu
- 5.9 Server Mgmt menu
- 5.10 Security menu
- 5.11 Boot menu
- 5.12 Tool menu
- 5.13 Save & Exit menu
- Chapter 6: RAID Configuration
- Chapter 7: Driver Installation
- Appendix
5-61
RS720Q-E10-RS8U
The following item appears only when
Uncore Freq Scaling
is set to
[Disable]
.
Uncore Freq [127]
Conguration options: [0] - [127]
AVX Licence Pre-Grant Override [Disable]
Enabled AVX ICCP pre-grant level override.
Conguration options: [Disable] [Enable]
The following item appears only when
AVX Licence Pre-Grant Override
is set to
[Enable]
.
AVX ICCP pre-grant level [128 Heavy]
Pre-grants an AVX level to the core. Base frequency is not updated.
Conguration options: [128 Heavy] [256 Light] [256 Heavy] [512 Light] [512 Heavy]
SpeedStep (Pstates) [Enable]
Allows you to enable or disable EIST (P-States).
Conguration options: [Disable] [Enable]
The following items appear only when
SpeedStep (Pstates)
is set to
[Enable]
.
Configure TDP Lock [Enable]
Allows you to congure TDP CONTROL Lock Bit.
Conguration options: [Disable] [Enable]
AVX P1 [Normal]
AVX P1 level selection.
Conguration options: [Normal] [Level 1] [Level 2]
Activate SST-BF [Disable]
Allows you to enable or disable SST-BF.
Conguration options: [Disable] [Enable]
The following item appears only when
Activate SST-BF
is set to
[Enable]
.
Configure SST-BF [Enable]
Allows BIOS to congure SST-BF High Priority Cores so that SW does not have to
congure.
Conguration options: [Disable] [Enable]
EIST PSD Function [HW_ALL]
Conguration options: [HW_ALL] [SW_ALL]
Boot performance mode [Max Performance]
Allows you to select the performance state that the BIOS will set before OS hand off.
Conguration options: [Max Performance] [Max Efcient] [Set by Intel Node Manager]
Energy Efficient Turbo [Enable]
Allows you to enable or disable Energy Efcient Turbo.
Conguration options: [Disable] [Enable]