User Manual

5-67
RS720Q-E10-RS8U
5.8.1 Change Smbios Event Log Settings
Press <Enter> to change the Smbios Event Log conguration.
All values changed here do not take effect until computer is restarted.
Enabling/Disabling Options
Smbios Event Log [Enabled]
Change this to enable or disable all features of Smbios Event Logging during boot.
Conguration options: [Disabled] [Enabled]
The following items only appear when
Smbios Event Log
is set to
[Enabled]
.
Erasing Settings
Erase Event Log [No]
Choose options for erasing Smbios Event Log. Erasing is done prior to any logging activation
during reset.
Conguration options: [No] [Yes, Next reset] [Yes, Every reset]
When Log is Full [Do Nothing]
Choose options for reactions to a full Smbios Event Log.
Conguration options: [Do Nothing] [Erase Immediately]
Custom Options
Log EFI Status Code [Enabled]
Allows you to enable or disable the logging of EFI Status Codes as OEM reserved type E0 (if
not already converted to legacy).
Conguration options: [Disabled] [Enabled]