User Manual
Table Of Contents
- Safety information
- Chapter 1: Product Introduction
- Chapter 2: Hardware Information
- Chapter 3: Installation Options
- Chapter 4: Motherboard Information
- Chapter 5: BIOS Setup
- 5.1 Managing and updating your BIOS
- 5.2 BIOS setup program
- 5.3 Main menu
- 5.4 Performance Tuning menu
- 5.5 Advanced menu
- 5.5.1 OffBoard SATA Controller Configuration
- 5.5.2 Trusted Computing
- 5.5.3 ACPI Settings
- 5.5.4 Redfish Host Interface Settings
- 5.5.5 Onboard LAN Configuration
- 5.5.6 Serial Port Console Redirection
- 5.5.7 SIO Common Setting
- 5.5.8 SIO Configuration
- 5.5.9 PCI Subsystem Settings
- 5.5.10 USB Configuration
- 5.5.11 Network Stack Configuration
- 5.5.12 CSM (Compatibility Support Module)
- 5.5.13 NVMe Configuration
- 5.5.14 APM Configuration
- 5.5.15 Intel(R) Virtual RAID on CPU
- 5.5.16 Third-party UEFI driver configurations
- 5.6 Platform Configuration menu
- 5.7 Socket Configuration menu
- 5.8 Event Logs menu
- 5.9 Server Mgmt menu
- 5.10 Security menu
- 5.11 Boot menu
- 5.12 Tool menu
- 5.13 Save & Exit menu
- Chapter 6: RAID Configuration
- Chapter 7: Driver Installation
- Appendix
6-3
RS720Q-E10-RS8U
6.2 Intel
®
Virtual Raid on CPU in BIOS
This feature allows you to do CPU RAID functions with Intel
®
CPU RSTe.
• Due to chipset behavior, enabling the Intel
®
RSTe CPU RAID functions requires an
Intel
®
VROC hardware key module.
• Refer to section
4.3 Internal connectors
for the location of the VROC_KEY1
connector.
• The KEY module is purchased separately.
To enter the Intel
®
Virtual Raid on CPU in BIOS:
1. Enter the BIOS Setup during POST.
2. Go to the
Advanced
menu
>
Intel(R) Virtual Raid on CPU
>
All Intel VMD
Controllers
then press <Enter> to display the Intel
®
Virtual Raid on CPU menu.
Refer to Chapter 5 for details on entering and navigating through the BIOS Setup.