User Manual
Table Of Contents
- Safety information
- Chapter 1: Product Introduction
- Chapter 2: Hardware Information
- Chapter 3: Installation Options
- Chapter 4: Motherboard Information
- Chapter 5: BIOS Setup
- 5.1 Managing and updating your BIOS
- 5.2 BIOS setup program
- 5.3 Main menu
- 5.4 Performance Tuning menu
- 5.5 Advanced menu
- 5.5.1 OffBoard SATA Controller Configuration
- 5.5.2 Trusted Computing
- 5.5.3 ACPI Settings
- 5.5.4 Redfish Host Interface Settings
- 5.5.5 Onboard LAN Configuration
- 5.5.6 Serial Port Console Redirection
- 5.5.7 SIO Common Setting
- 5.5.8 SIO Configuration
- 5.5.9 PCI Subsystem Settings
- 5.5.10 USB Configuration
- 5.5.11 Network Stack Configuration
- 5.5.12 CSM (Compatibility Support Module)
- 5.5.13 NVMe Configuration
- 5.5.14 APM Configuration
- 5.5.15 Intel(R) Virtual RAID on CPU
- 5.5.16 Third-party UEFI driver configurations
- 5.6 Platform Configuration menu
- 5.7 Socket Configuration menu
- 5.8 Event Logs menu
- 5.9 Server Mgmt menu
- 5.10 Security menu
- 5.11 Boot menu
- 5.12 Tool menu
- 5.13 Save & Exit menu
- Chapter 6: RAID Configuration
- Chapter 7: Driver Installation
- Appendix
Chapter 2: Hardware Information
2-4
2.2 Air Duct
The RS720Q-E10-RS8U server system comes with a motherboard fan air duct to enable
better air flow inside the motherboard while the system is running.
2.2.1 Removing the air duct
1. Remove the three (3) screws securing the air duct on the left and right of the node
chassis.
2. Carefully lift the air duct out of the chassis.
1. Position the air duct on top of the motherboard then carefully fit it on top of the
motherboard. Refer to the following illustration for the correct orientation of the air duct.
2.2.2 Installing the air duct
Insert the air duct on the gaps between the memory slots.
Ensure that the air duct is firmly fitted to the motherboard.
2. Secure the air duct using the three (3) screws removed previously.