User Manual

5-44 Chapter 5: BIOS setup

User Password

If you have set a user password, you must enter the user password for accessing

the system. The User Password item on top of the screen shows the default Not

Installed. After you set a password, this item shows Installed.

To set a user password:

1. Select the

User Password item and press <Enter>.

2. From the

Create New Password box, key in a password, then press

<Enter>.

3. Conrm the password when prompted.

To change a user password:

1. Select the

User Password item and press <Enter>.

2. From the

Enter Current Password box, key in the current password, then

press <Enter>.

3. From the

Create New Password box, key in a new password, then press

<Enter>.

4. Conrm the password when prompted.

To clear the user password, follow the same steps as in changing a user password,

but press <Enter> when prompted to create/conrm the password. After you clear

the password, the User Password item on top of the screen shows Not Installed.

To clear the administrator password, follow the same steps as in changing an

administrator password, but press <Enter> when prompted to create/conrm the

password. After you clear the password, the Administrator Password item on top

of the screen shows Not Installed.

5.10 Tool menu

The Tool menu items allow you to congure options for special functions. Select an

item then press <Enter> to display the submenu.

Be used to update BIOS

ASUS EZ Flash 2 Utility

Allows you to run ASUS EZ Flash BIOS ROM Utility when you press <Enter>.

Check section 5.1.2 ASUS EZ Flash 2 Utility for details.

Main Advanced Server Mgmt Event Logs Boot Monitor Security Tool Exit