User Manual

6-29ASUS RS720Q-E7/RS12, RS724Q-E7/RS12, RS726Q-E7/RS12

6.3.3 Deleting a RAID set

Take caution when deleting a RAID set. You will lose all data on the hard disk

drives when you delete a RAID set.

To delete a RAID set:

1. From the utility main menu, select

2. Delete RAID Volume and press

<Enter>. The following screen appears.

2. Use the up/down arrow keys to select the RAID set you want to delete, and

then press <Del>. The following warning message appears.

3. Press <Y> to delete the RAID set and return to the utility main menu, or press

<N> to return to the DELETE VOLUME menu.

ALL DATA IN THE VOLUME WILL BE LOST!

(This does not apply to Recovery volumes)

Are you sure you want to delete volume “Volume0”? (Y/N):

[ DELETE VOLUME VERIFICATION ]

[ DELETE VOLUME MENU ]

[ HELP ]

Deleting a volume will reset the disks to non-RAID.

WARNING: ALL DISK DATA WILL BE DELETED.

(This does not apply to Recovery volumes)

[↑↓]-Select [ESC]-Previous Menu [DEL]-Delete Volume

Name Level Drives Capacity Status Bootable

Volume0 RAID0(Stripe) 2 298.0GB Normal Yes

Intel(R) Rapid Storage Technology enterprise - SCU Option ROM - 3.0.0.1104