User Manual

6-37ASUS RS720Q-E7/RS12, RS724Q-E7/RS12, RS726Q-E7/RS12
6.4.2 Change Volume Type
When you are nished to create a RAID set, you can view or change related items
in the Volume Properties eld.
According to the following steps to change the type in Volume Properties:
1. Click the SAS array items you want to change in
Volumes eld.
2 From the
Volume Properties eld, select Type:RAID 1 Change type.
We recommend a lower stripe size for server systems, and a higher stripe size for
multimedia computer systems used mainly for audio and video editing.
3. You can change the Name, Select the new volume type, and Select
additional disks to include in the new volume if needed.
4. Then select the
Data stripe size for the RAID array (for RAID 0, 10 and 5
only), and then click OK. The available stripe size values range from 4 KB to
128 KB. The following are typical values:
RAID 0: 128KB
RAID 10: 64KB
RAID 5: 64KB