Quick Start Guide

English

8. Your Internet and wireless settings are displayed. Click Next to continue.

9. Read the wireless network connection tutorial. When done, click Finish.

NOTES: You can assign a network name with up to 32 characters.

There are two ways for your wireless clients (notebook, tablet PC, smartphone

and so on) to connect to RT-AC1900P’s wireless network.

Connect to the wireless network manually

To connect to the wireless network manually:

1. EnabletheWi-Fifunctiononyourwirelessclienttoscanforavailablewireless

networks.

2. Select the SSID or network name that you assigned to your RT-AC1900P’s

network.

3. Enter the password and click Connect.

Connect to the wireless network through WPS

RT-AC1900P has a WPS (Wi-Fi Protected Setup) button for you to connect your

wireless client to RT-AC1900P’s network without entering password.

To connect to the wireless network through WPS:

1. Press the WPS button at the back of RT-AC1900P. Refer to the section A quick

look at your RT-AC1900P for the location of the WPS button).

2. Press the WPS button of your wireless client within two minutes or follow the

WPSinstructionsthatcamewiththewirelessclient.Whenconnectingvia

WPS, the Power LED on your router blinks fast.

3. Wait until your router’s Power LED turns into a solid light indicating a suc-

cessfully connection between your router and your wireless client.

Connect to the wireless network