User's Manual

3.5 Using the USB Application

The USB Application function provides Servers Center.

IMPORTANT! To use the server functions, you need to insert a USB

storage device, such as a USB hard disk or USB ash drive, in the USB

2.0 port on the rear panel of your wireless router. Ensure that the USB

storage device is formatted and partitioned properly. Refer to the ASUS

website at http://event.asus.com/2009/networks/disksupport/ for the

le system support table.

3.5.1 Using Servers Center

Servers Center allows you to share the media les from the USB

disk via a Media Server directory or Samba share service. You

can also congure other settings for the USB disk in the Servers

Center.

Using Network Place (Samba) Share service

Network Place (Samba) Share allows you to set up the accounts

and permissions for the Samba service.

To use Samba share:

1. From the navigation panel, go to General > USB application >

Servers Center.

NOTE: Network Place (Samba) Share is enabled by default.

2. Follow the steps below to add, delete, or modify an account.