ASUS AIMESH SETUP GUIDE Step 1 Preparation Before you start to setup ASUS AiMesh, you have to prepare: Two (2) ASUS routers (models supporting AiMesh https://www.asus.com/AiMesh/). Assign one router as the AiMesh router, and another router as AiMesh node. Router with the highest specifications should be used as the AiMesh router. Locate AiMesh router and node within 1-3 meters when setup process.
4. 5. 6. Launch a web browser. You will be redirected to the ASUS Setup Wizard. If not, navigate to http://router.asus.com. Go to Administration Firmware Upgrade. Click on Check, and it will upgrade firmware automatically. After firmware update completed, please go to Network Map page to confirm whether AiMesh icon showed up.
Step 3 Restore AiMesh node Reset AiMesh node to factory default 1. Press the reset button of AiMesh node at least 5 seconds, and release the reset button until the power LED is flashing slowly. 2. When reset process completed, remove network cable, let AiMesh node keep power on and standby for AiMesh system setting. AiMesh node: 1. Firmware upgrade 2. Reset to default 3. Remove network cable 4. Keep power on 5.
Step 4 Setting up AiMesh router Setting up AiMesh router 1. Unplug your cable/DSL modem. If it has a battery backup, remove the battery. 2. Connect your modem to the WAN port of AiMesh router with network cable. And then power on your modem. Check your modem LED lights to ensure the connection is active. 3. Plug in the power adapter and press the power button at the back of your router. Check the WAN and 2.4G / 5G LED lights to ensure the hardware connection is ready. 4.
Option a: Set up AiMesh on Web GUI 1. . Connect your PC to AiMesh router with a network cable: turn off Wi-Fi on your PC, and then use an Ethernet cable to connect the one of LAN port of your AiMesh router and your PC. Modem AiMesh router AiMesh node **If you want to use Wi-Fi to connect your PC and AiMesh router instead of network cable, on your PC, search the network name (SSID) of your AiMesh router and connect it. You can find the default network name (SSID) at the back label of your AiMesh router.
4. After click Search, it will search AiMesh node automatically. When AiMesh node shows on this page, click it to add it into AiMesh system. It is best to place all routers in close proximity when synchronizing for the first time in case of interference. If it cannot find any AiMesh node nearby or synchronization fails, please check followings and try again. a). Move your AiMesh node closed to AiMesh router within 1-3 meters. b). Your AiMesh node is powered on. c).
Option b: Set up AiMesh on ASUS Router APP-Android 1. 2. 3. Download ASUS Router APP on Google Play. Search the network name (SSID) of your AiMesh router, and connect it. You can find the default network name (SSID) at the back label of your AiMesh router. After login, go to More AiMesh, and get started. 4. After click Get Started, it will search AiMesh node automatically. When AiMesh node shows on this page, click it to add it into AiMesh system.
If it cannot find any AiMesh node nearby or synchronization fails, please check followings and try again. a). Move your AiMesh node closed to AiMesh router within 1-3 meters. b). Your AiMesh node is powered on. c). Your AiMesh node is upgraded to AiMesh-supported firmware. d). Your AiMesh node is reset to default. 5. 6. A message is displayed when synchronization is completed. Congratulation! You can find below pages show up when AiMesh node has successfully added to AiMesh network.
4. After click, it will search AiMesh node automatically. When AiMesh node shows on this page, click it to add it into AiMesh system. It is best to place all routers in close proximity when synchronizing for the first time in case of interference. If it cannot find any AiMesh node nearby or synchronization fails, please check followings and try again.
a). Move your AiMesh node closed to AiMesh router between 1-3 meters. b). Your AiMesh node is powered on. c). Your AiMesh node is upgraded to AiMesh-supported beta firmware. d). Your AiMesh node is reset to default. 5. 6. Step 5 Placement A message is displayed when synchronization is completed. Congratulation! You can find below pages show up when AiMesh node has successfully added to AiMesh network. Go to Devices AiMesh for more information. Put AiMesh router and node aim high and in open space. 7.
2. Strongly recommend you to put the AiMesh node BETWEEN your AiMesh router and your existing dead zone. Before Modem Router Dead zone After Modem 3. AiMesh router AiMesh node No dead zone Put AiMesh router in the center of the house. We recommend various location placement examples.
AiMesh node AiMesh node AiMesh router AiMesh node AiMesh node AiMesh router
Ethernet backhaul Wired connection between AiMesh router and node AiMesh system supports both wireless and wired connection between AiMesh router and node to maximize throughput and stability. AiMesh analyzes the wireless signal strength for each frequency band available, and then determines automatically whether a wireless or wired connection is best to serve as the inter-router connection backbone. Follow the setup steps to establish a connection between the AiMesh router and node via Wi-Fi first.
Feedback If you have encountered any problem or issue when set up or use ASUS AiMesh, please go to web GUI (http://router.asus.com), and go to page Administration Feedback. 1. Fulfill the feedback form. 2. Enable system diagnostic and check all capturing logs. 3. Send the feedback form, and ASUS will reply you as soon as possible.