User's Manual

55
4.1.4 Wireless MAC Filter
Wireless MAC lter provides control over packets transmitted to
a specied MAC (Media Access Control) address on your wireless
network.
To set up the Wireless MAC lter:
1. From the navigation panel, go to
Advanced Settings >
Wireless > Wireless MAC Filter tab.
2. In the
Frequency eld, select the frequency band that you
want to use for the Wireless MAC lter.
3. In the
MAC Filter Mode dropdown list, select either Accept or
Reject.
• Select
Accept to allow devices in the MAC lter list to access
to the wireless network.
• Select
Reject to prevent devices in the MAC lter list to
access to the wireless network.
4. On the MAC lter list, click the
Add button and key in the
MAC address of the wireless device.
5. Click
Apply.