User's Manual

7
1.3 Your wireless router
WAN (Internet) LED
Red: No IP or no physical connection.
On: Has physical connection to a wide area network (WAN).
LAN 1~4 LED
O: No power or no physical connection.
On: Has physical connection to a local area network (LAN).
5GHz LED
O: No 5GHz signal.
On: Wireless system is ready.
Flashing: Transmitting or receiving data via wireless connection.
2.4GHz LED
O: No 2.4GHz signal.
On: Wireless system is ready.
Flashing: Transmitting or receiving data via wireless connection.
Power LED
O: No power.
On: Device is ready.
Flashing slow: Rescue mode
Power (DCIN) port
Insert the bundled AC adapter into this port and connect your router to a power source.
Power button
Press this button to power on or o the system.
USB 3.2 Gen 1 port
Insert a USB 3.2 Gen 1 device such as a USB hard disk or a USB ash drive into this port.
Insert your iPad’s USB cable into this port to charge your iPad.
LAN 1 ~ 4 ports
Connect network cables into these ports to establish LAN connection.