User's Manual
Table Of Contents
- 1 Getting to know your wireless router
- 2 Getting started
- 3 Configuring the General and Advanced Settings
- 4 Utilities
- 5 Troubleshooting
- Appendices
35
3.5.3 Troubleshooting
If your AiMesh router cannot nd any AiMesh node nearby or
synchronization fails, please check followings and try again.
1) Move your AiMesh node closer to the AiMesh router ideally.
Ensure it is within 1-3 meters.
2) Y
our AiMesh node is powered on
.
3)
Your AiMesh node is upgraded to AiMesh supported
rmware.
i. Download AiMesh - supported reware at:
https://www.asus.com/AiMesh/
ii. Power on your AiMesh node and connect it to your PC via a
network cable.
iii. Launch a web GUI. You will be redirected to the ASUS Setup
Wizard. If not, navigate to http://www.asusrouter.com
iv. Go to Administration > Firmware Upgrade. Click on
Choose File, and upload the AiMesh-supported rmware.
v. After rmware uploaded, please go to Network Map page to
conrm whether AiMesh icon showed up.
vi.
Press the reset button on your AiMesh node for at least 5
seconds. Release the reset button when the power LED
is ashing slowly.