User's Manual

64
3.13 Smart Connect
Smart Connect is designed to automatically steer clients to one
of three radios (2.4GHz and 5GHz) to maximize total wireless
throughput use.
3.13.1 Setting up Smart Connect
You can enable Smart Connect from the Web GUI through the
following two ways:
• Via the Wireless screen
1. On your web browser, manually key in the wireless router’s
default IP address: http://www.asusrouter.com.
2. On the login page, key in the user name and password that
you have set in 2.2 Quick Internet Setup (QIS) with Auto-
detection and click OK. The QIS page launches automatically.
3. From the navigation panel, go to Advanced Settings >
Wireless > General.
4. Move the slider to ON in the Enable Smart Connect eld. This
function automatically connect the clients in your network to
the appropriate band for optimal speed.