Quick Start Guide

RT-AX86S
Wireless-AX5700 Dual-band Gigabit Router
Quick
Start Guide
Hardware Explanations
I/O Ports Overview LED Lights Overview
DC Power adapter DC Output: +12V with 3A current
Operating Temperature 0~40
o
C Storage 0~70
o
C
Operating Humidity 50~90% Storage 20~90%
Specications:
One Router Setup Steps
Prepare your Modem
01
1
Unplug the power of cable / DSL modem. If it
has a battery backup, remove the battery.
5
[App] Launch ASUS Router App and follow
the instructions to complete the setup.
WE SUGGEST...
Modem back
Unplug
Install your Router
02
1
Plug the adapter into the DCIN port, and press the Power
switch.
2
Connect your modem to WAN port at the back side of the router with
the network cable provided.
3
Power on the modem. Plug modem to the
power outlet and power on.
Modem back
4
Check the modem LED lights to ensure the connection is active.
If you are using DSL for
internet, you will need
your username / password
from your Internet service
provider (ISP) to properly
configure your router.
Modem front
– Or via web browser
3
[Wired] Connect your
PC to LAN port at the
back side of the router
using an additional
network cable.
[Wireless] Connect to the network with
default SSID shown on the product
label on the back side of your router
“ASUS_XX”.
4
[Wired / Wireless] Open a web browser.
You will be redirected to the ASUS Setup Wizard. If not, navigate to
http://router.asus.com.
Follow the instructions to
complete the setup.



– Via app
3
[App] On your iOS or Android mobile device, go
to the app store, search forASUS Router, and
download the app.
4
[App] On your iOS or Android mobile device, tapSettings > Wi-Fi,
connect to the default network SSID shown on the product label on
the back side of the router. Or scan the QR code on the product label
to connect the default network SSID.
* XX refers to the last two
digits of MAC address. You
can find it on the label on the
back of your router.

_



LAN WAN USB 2.4GHz 5GHz POWERWPS
2
The power LED will light up when the hardware is ready.
DCIN port
LAN ports 1-4
WAN port
Reset button
USB 3.0 port
Power
switch
LED on/off
button
USB 2.0 port
WPS button