User's Manual

8
Power LED
O: No power.
On: Device is ready.
Flashing slow: Rescue mode.
LED On/O button
This button turns on/o the LED indicators.
Power (DCIN) port
Insert the bundled AC adapter into this port and connect your router to a power source.
Power switch
Press this button to power on or o the system.
Reset button
This button resets or restores the system to its factory default settings.
USB 3.2 Gen 1 port
Insert a USB 3.2 Gen 1 device such as a USB hard disk or a USB ash drive into this port.
Insert your iPad’s USB cable into this port to charge your iPad.
USB 2.0 port
Insert a USB 2.0 device such as a USB hard disk or a USB ash drive into this port.
2.5G port
Connect a network cable into this port to get 2Gbps speed.
WAN (Internet) port
Connect a network cable into this port to establish WAN connection.
LAN 1~4 ports
Connect network cables into these ports to establish LAN connection.
WPS button
This button launches the WPS Wizard.
NOTES:
• Use only the adapter that came with your package. Using other
adapters may damage the device.
• Specications:
DC Power adapter DC Output: +12V with 3A current
DC Output: +19.5V with 2.31A current
Operating Temperature 0~40
o
C Storage 0~70
o
C
Operating Humidity 50~90% Storage 20~90%