User's Manual

7
1.3 Your wireless router
2.5G WAN/LAN1 LED
O: No 2.5G WAN/LAN1 port connection.
On: Has physical connection to 2.5G WAN/LAN1 port.
1G WAN/LAN1 LED
O: No 1G WAN/LAN1 port connection.
On: Has physical connection to 1G WAN/LAN1 port.
LAN 2~4 LEDs
O: No power or no physical connection.
On: Has physical connection to a local area network (LAN).
6GHz LED
O: No 6GHz signal.
On: Wireless system is ready.
Flashing: Transmitting or receiving data via wireless connection.
5GHz LED
O: No 5GHz signal.
On: Wireless system is ready.
Flashing: Transmitting or receiving data via wireless connection.
2.4GHz LED
O: No 2.4GHz signal.
On: Wireless system is ready.
Flashing: Transmitting or receiving data via wireless connection.
Power LED
O: No power.
On: Device is ready.
Flashing slow: Rescue mode.
Power (DCIN) port
Insert the bundled AC adapter into this port and connect your router to a power source.
LAN 2~4 ports
Connect network cables into these ports to establish LAN connection.
1G WAN/LAN1 port
Connect a network cable into this port to establish 1G WAN/LAN1 connection.