User manual

27
Chapter 5: Installing the utilities RT-G32
Set IP address manually
Click Start > Control Panel > Network Connection. Right-click Local Area
Connection then select Properties.
Set the IP address manually (192.168.1.254).
3. Power off the wireless router, press and hold the reset button and then power
on the device again. The wireless device enters the rescue mode after the
WLAN LED ashes.
DO NOT shut down or reset the device while updating the rmware! Doing so can cause system
boot failure!
• We suggest you use wired connection and set the IP address manually in order to gain an
ideal environment for transmission.
• Make sure rewall on PC is disabled.