User's Manual
Table Of Contents
- About this guide
- Mounting options
- Hardware features
- Before you proceed
- System requirements
- Package contents
- Using the Quick Internet Setup (QIS)
- Setting up the wireless router
- Accessing the wireless router
- Restoring/Saving/Uploading settings
- Upgrading the firmware
- Managing bandwidth with EzQoS
- Using the Network Map
- Configuring via the web GUI
- WPS Wizard
- Firmware Restoration
- Device Discovery
- Installing the utilities
- ASUS DDNS Service
- Troubleshooting
- ASUS Contact information
- Notices
17
Chapitre 3 : Congurer les clients RT-N10
2. Lancez votre explorateur Internet. La page Web de QIS apparaît
automatiquement. Sélectionnez le mode Access Point, puis cliquez sur Next.
Note : si la page Web de QIS n’apparaît pas lorsque vous lancez votre explorateur Internet,
désactivez les paramètres proxy de l’explorateur Internet.
3. Congurez les paramètres de sécurité sans l incluant le SSID ainsi que la
méthode d’authentication et de chiffrement. Cliquez sur Finish.