User's Manual
27
Chapter 4: Conguring via the web GUI RT-N10U
Setting up the wireless router in AP mode
In the AP mode, the wireless router receives the WAN IP address from the router
connected to the WAN port and provides you with wireless radio signals. The NAT,
rewall, and IP sharing services are disabled.
To set up the wireless router in AP mode:
1. From the navigation menu, click Operation Mode, select AP mode, and click
Save.
2. From the network list, select the network that you want to connect to, then click
Connect.
E6922_RT-N10U v2_Manual.indd 27 10/20/11 1:01:06 PM