User Manual

RT-N13 Wireless Router User Manual
7
PPTP user
If you are using PPTP services, select
ADSL connection that requires
username, password and IP address.
Fill
in the username, password and IP address
provided by your ISP into the elds. Click
Next
to continue.
Static IP user
If you are using ADSL or other connection
type that uses static IP address, select
ADSL or other connection type that
uses static IP address
. Input the IP
address, subnet mask, and default
gateway provided by your ISP. You
can specify DNS servers, or get DNS
information automatically.
3. To set up your wireless interface,
specify an SSID (Service Set Identier),
which is a unique identier attached to
packets sent over WLAN. This identier
emulates a password when a device
attempts to communicate with your
wireless router via WLAN.
If you want to protect transmitted data,
select a
Security Level
to enable encryption methods.
Medium:
Only users with the same WEP key settings can connect to your wireless
router and transmit data using 64bits or 128bits WEP key encryption.
High:
Only users with the same WPA pre-shared key settings can connect to your
wireless router and transmit data using TKIP encryption.