User Manual

36
RT-N13 Chapter 6: Troubleshooting
Problem Action
Network name or encryption
keys are forgotten
• Try setting up the wired connection and

• Press the Restore button at the rear panel of

How to restore the system
to its default settings
• Press the Restore button at the rear panel of

• Refer to the section Restoring to the
default settings in Chapter 5 of this user
manual.
The following are the factory default settings:
User Name: admin
Password: admin
Enable DHCP: Yes (if WAN cable is plugged
in)
IP address: 192.168.1.1
Domain Name: (Blank)
Subnet Mask: 255.255.255.0
DNS Server 1: 192.168.1.1
DNS Server 2: (Blank)
SSID: default