User's Manual
Table Of Contents
- Setting up the wireless router
- Accessing the wireless router
- Connecting a USB printer
- Upgrading the firmware
- Managing EzQoS bandwidth
- Using AiDisk
- Using the Network Map
- Configuring via the web GUI
- Download Master
- WPS Wizard
- Firmware Restoration
- Device Discovery
- Installing the utilities
- ASUS DDNS Service
- Troubleshooting
- Appendices
50
RT-N13U Capitolo 4: Congurazione tramite Interfaccia Graca Web
12.Selezionare Yes (Sì) per stampare
una pagina di testo.Cliccare Next
(Avanti) per stampare.
13. L’installazione è completata.
Cliccare Finish (Fine) per terminare
il programma Add Printer Wizard.
Nota: Se al computer è stata già collegata una stampante, cliccare con il tasto di destra del mouse
sull’icona stampante e selezionare Property > Port (Proprietà -> scheda Porta) per aggiungere
una porta standard TCP/IP. Cliccare Add Port (Aggiungi Porta) e poi selezionare Standard
TCP/ IP Port (Porta Standard TCP/IP), quindi cliccare il pulsante New Port (Nuova Porta). Fare
riferimento ai passaggi 5-8 per la procedura di installazione.
Nota: Se si utilizza Windows® 98 o ME, che non supportano la porta a Standard TCP/IP, è necessario
ricorrere alla Porta Remota che è supportata dal Router Wireless ASUS.
14. Dopo aver collegato la stampante
USB ed installato il driver della
stampante, il nome e lo stato
della stampante sono visualizzati
sull’interfaccia graca web del
router wireless.