Quick Start Guide

ManualsBrandsASUS ManualsPC ComponentsASUS RTAC68U

Quick

Start Guide

RT-AC68U

Wireless-AC1900

with AiMesh Wi-Fi System

Connect your Device

ONE ROUTER SETUP STEPS

WE SUGGEST...

Prepare your Modem

Connect your modem

to the routerwith the

network cable provided.

Power on the modem.

Plug modem to the power

outlet and power on.

Check the modem LED lights

to ensure the connection is active.

Hardware Explanations

Button Explanations

LED Explanations

Connect your PC to the router using an additional

network cable.

Open a web browser.

You will be redirected to the ASUS Setup Wizard. If not, navigate

to http://router.asus.com.

Power on the router.

Plug in and press the power button at the back of your router.

Check the WAN and 2.4GHz / 5GHz LED lights to ensure the

hardware connection is ready.

Unplug the power of cable / DSL modem.

If it has a battery backup, remove the battery.

01 02

Preparing to setup an AiMesh Wi-Fi system

Two (2) ASUS routers (models supporting AiMesh https://www.asus.com/AiMesh/).

BEFORE SETTING

Preparing to setup a standalone router

Go to ONE ROUTER SETUP STEPS.

** If you have multiple AiMesh routers, we recommend using the router with the highest speciﬁcations as your

AiMesh router and the others as AiMesh nodes.

Assign one as AiMesh router, and another one as AiMesh node.

Go to AiMesh SETUP STEPS.

RESET BUTTON

Reset the system to its factory default settings.

Connect your modem to this port with a network cable.

WAN PORT

Connect your PC to a LAN port with a network cable.

LAN PORT 1-4

Power5GHz2.4GHzUSB2.0USB3.0WANLAN 1-4

IfyouareusingDSLforinternet,youwillneedyourusername / passwordfrom

yourInternetserviceprovider(ISP)toproperlyconﬁgureyourrouter.

(

2 4

AiMesh routerAiMesh node

Reset

button

LAN

port 1-4

WAN

port

USB 3.0

/2.0 ports

LED On/Off

button

Wi-Fi

On/Off

button

Power

button

WPS

button

DCIN

port

ONE ROUTER SETUP AiMesh SETUP STEPS

Plug the adapter into the DCIN port, and press the power button.

The Power, 2.4GHz and 5GHz LEDs will light up when your hardware is ready.

350.0 x 521.5 mm (B3 Size)

Summary of content (2 pages)

PAGE 1
Hardware Explanations Quick Start Guide 1 Plug the adapter into the DCIN port, and press the power button. 2 The Power, 2.4GHz and 5GHz LEDs will light up when your hardware is ready. Button Explanations RESET BUTTON Reset the system to its factory default settings. Wi-Fi WPS On/Off Power DCIN USB 3.0 WAN button button button port /2.
PAGE 2
AiMesh SETUP STEPS 01 Prepare 03 AiMesh router Place your AiMesh router and node within 1-3 meters of each other during the setup process. 02 03 1 Refer to ONE ROUTER SETUP STEPS to connect your AiMesh router to your PC and modem, and then log in into the web GUI. within 1-3 meter 02 AiMesh node AiMesh router Modem AiMesh node Factory default status. Keep power on and standby for AiMesh system setting.