User Guide

S-presso Quick Installation GuideS-presso Quick Installation Guide
S-presso Quick Installation GuideS-presso Quick Installation Guide
S-presso Quick Installation Guide
1-11-1
1-11-1
1-1
Basic installation
Refer to the
Hardware Information Hardware Information
Hardware Information Hardware Information
Hardware Information user guide for detailed
instructions on how to set up your S-presso barebone system.
1. Remove the front panel and top cover.
2. Remove the power supply.
3. Install the following items:
a. CPU
b. Memory module/s
c. Expansion card/s
d. Optical drive
e. Hard disk drive
4. Re-install the power supply unit.
5. Replace the top cover and front panel.
6. Connect external devices to the front and rear panels.
7. Plug the system to a power source.
Starting up
Refer to the
Software Information Software Information
Software Information Software Information
Software Information user guide for detailed
instructions on how to install the following items to your S-presso
barebone system.
Make sure your system is set to the correct voltage to prevent body
injury and damage to the system.
1. Install Instant On. (Model S1-P111 only)
E1719E1719
E1719E1719
E1719
2. Install the operating system.
3. Install drivers and applications.
4. Install Home Theater. (Model S1-P111 only)
Instant On does NOT support add-on devices such as VGA cards.

Summary of content (10 pages)