User Guide

Parts of the display and their functions14
Using the remote control
Installing remote control batteries
Remote control usage tips
• Point and aim the top front of the remote control directly at the display's remote control
sensor window or IR sensor on extender cable when pressing the buttons.
• Do not let the remote control become wet or place it in humid environments (like
bathrooms).
• If the display’s remote control sensor is exposed to direct sunlight or strong light, the
remote control may not operate properly. In this situation, change the light source, readjust
the angle of the display or operate the remote control from a location closer to display’s
remote control sensor.
1. Open the remote control battery compartment cover.
2. Insert the supplied batteries ensuring that the positive
and negative marked battery terminals match the (+)
and (-) marks in the battery compartment.
Note:
• The supplied batteries are provided for your convenience so that
you can operate the display straight away. You should replace
them as soon as possible.
3. Refit the battery compartment cover.
Max. 10 m
(32.8 feet)