User’s Manual

    󰉻󰉻󰉻
4-37


主機板內建的硬體監控功能會自動偵測並顯示主機板、CPU，南橋、北
橋與 OPT1/2/3 溫度。這些項目無法由使用者進行設定。

當北橋或南橋晶片的溫度因過熱而超過設定值時，系統會自動關閉以保
護晶片免於毀損。設定選項有：[Disabled] [70] [80] [90]。
          

主機板內建的硬體監控功能會自動偵測系統的電壓輸出。
󰍡
Select Menu
Item Specic Help
Press [Enter] to set.
Phoenix-AwardBIOS CMOS Setup Utility
Power
F1:Help
↑↓
: Select Item -/+: Change Value F5: Setup Defaults
ESC: Exit
→←
: Select Menu Enter: Select SubMenu F10: Save and Exit
Voltage Monitor
Vcore Voltage [ 1.32V]
Memory Voltage [ 2.00V]
1.2V HT Voltage [ 1.23V]
NB Voltage [ 1.26V]
SB Voltage [ 1.50V]
CPU PLL Voltage [ 1.52V]CPU PLL Voltage [ 1.52V]
CPU VTT Voltage [ 1.20V]
DDR2 Termination Voltage [ 0.99V]
3.3V Voltage [ 2.89V]
5V Voltage [ 4.66V]
12V Voltage [11.64V]
Select Menu
Item Specic Help
Set NB Over
Temperature Warning
Message.
Phoenix-AwardBIOS CMOS Setup Utility
Power
F1:Help
↑↓
: Select Item -/+: Change Value F5: Setup Defaults
ESC: Exit
→←
: Select Menu Enter: Select SubMenu F10: Save and Exit
Temperature Monitor
CPU Temperature 30ºC
M/B Temperature 35ºC
NB Temperature 44ºC44ºC
SB Temperature 47ºC
OPT1 Temperature 0ºC
OPT2 Temperature 0ºC
OPT3 Temperature 0ºC
NB Overheat Protection [90]NB Overheat Protection [90]
SB Overheat Protection [90]
OPT1 Cable Overheat Protection[90]
OPT2 Cable Overheat Protection[90]
OPT3 Cable Overheat Protection[90]