User Manual

ROG STRIX TRX40-E GAMING

1-17

Chapter 1

6. Fan and Pump connectors

The Fan and Pump connectors allow you to connect fans or pumps to cool the

system.

Header Max. Current Max. Power Default Speed Shared Control

CPU_FAN 1A 12W Q‑FanControlled A

CPU_OPT 1A 12W Q‑FanControlled A

AIO_PUMP 1A 12W Full‑Speed -

CHA_FAN1 1A 12W Q‑FanControlled -

CHA_FAN2 1A 12W Q‑FanControlled -

CHA_FAN3 1A 12W Q‑FanControlled -

W_PUMP+ 3A 36W Full‑Speed -

• DONOTforgettoconnectthefancablestothefanconnectors.Insufcientair

owinsidethesystemmaydamagethemotherboardcomponents.Thesearenot

jumpers! Do not place jumper caps on the fan connectors!

• Ensurethecableisfullyinsertedintotheconnector.

Forwatercoolingkits,connectthepumpconnectortotheW_PUMP+connector,then

connect the fan connectors to the CPU_FAN and CPU_OPT connectors.