User Manual
ROG STRIX TRX40-E GAMING
2-5
Chapter 2
2. Place nine (9) screws into the holes indicated by circles to secure the motherboard to
the chassis.
1. Place the motherboard into the chassis, ensuring that its rear I/O ports are aligned to
the chassis’ rear I/O panel.
2.1.3 Motherboard installation
• DO NOT over tighten the screws! Doing so can damage the motherboard.
• Ensure that the space above the installed motherboard at least 8cm to prevent the
MOS heatsink from interfering with the radiator or chassis fans.
• We recommend using an E-ATX chassis when installing this motherboard.