User’s Manual

14
Single Board Computer
6. DC Fan header
The DC Fan header allows you to connect a fan to actively cool the system.
Connector Type JST PH 2P 2.00mm
Reference PN: JST, PHR-2
NOTE: The fan is purchased separately.
WARNING!
• These are not jumpers! Do not place jumper caps on the fan connectors.
• Ensure the cable is fully inserted into the connector.
5. MIPI DSI connector
The MIPI DSI connector is used to connect a MIPI display module via a 4 lane MIPI-DSI cable. This connector
supports up to 6 Gbps connection speed.