User Manual

ASUS TS100-E11-PI4
4-25
Extended Synch [Disabled]
Ifthisitemisenabled,itwillallowgenerationofExtendedSynchronizationpatterns.
Congurationoptions:[Disabled][Enabled]
Link Training Retry [5]
AllowsyoutodenethenumberofRetryAttemptssoftwarewilltaketoretrainthelink
if previous training attempt was unsuccessful.
Congurationoptions:[Disabled][2][3][5]
Link Training Timeout (uS) [1000]
AllowsyoutodenethenumberofMicrosecondssoftwarewillwaitbeforepolling‘link
Training’bitinLinkStatusregister.
Congurationoptions:[10]-[10000]
Unpopulated Links [Keep Link ON]
If this option is set to
[Disable Link]
,inordertosavepower,softwarewilldisable
unpopulatedPCIExpressLinks.
Congurationoptions:[KeepLinkON][DisabledLink]
PCI Express GEN 2 Settings
The items in this submenu allow you change PCI Express GEN Devices Settings.
PCI Express GEN2 Device Register Settings
Completion Timeout [Default]
IndeviceFunctionsthatsupportCompletionTimeoutprogrammability,allowssystem
software to modify the Completion Timeout value.
[Default] 50usto50ms.
[Shorter] Softwarewilluseshortertimeoutrangessupportedbyhardware.
[Longer] Softwarewilluselongertimeoutranges.
[Disabled] Disablecompletiontimeout.
ARI Forwarding [Disabled]
If supported by hardware and set to
[Enabled]
,theDownstreamPortdisables
itstraditionalDeviceNumbereldbeing0enforcementwhenturningaType1
CongurationRequestintoaType0CongurationRequest,permittingaccessto
Extended Functions in an ARI Device immediately below the Port.
Congurationoptions:[Disabled][Enabled]
Atomic0p Requester Enable [Disabled]
If supported by hardware and set to
[Enabled]
,thisfunctioninitiatesAtomic0p
Requests only if Bus Master Enable bit is in the Command Register Set.
Congurationoptions:[Disabled][Enabled]
Atomic0p Egress Blocking [Disabled]
If supported by hardware and set to
[Enabled]
,outboundAtomic0pRequestsvia
EgressPortswillbeblocked.
Congurationoptions:[Disabled][Enabled]
IDO Request Enable [Disabled]
If supported by hardware and set to
[Enabled]
,thispermitssettingthenumberofID-
BasedOrdering(IDO)bit(Attribute[2])requeststobeinitiated.
Congurationoptions:[Disabled][Enabled]