User Manual

ASUS TS100-E11-PI4
4-29
Ipv6 HTTP Support [Disabled]
EnablesordisablestheIpv6HTTPBootSupport.Ifdisabled,Ipv6PXEbootoptionwill
not be created.
Congurationoptions:[Disabled][Enabled]
PXE boot wait time [0]
SetthewaittimetopressESCkeytoabortthePXEboot.Usethe<+>or<->toadjust
the value. The values range from 0 to 5.
Media detect count [1]
Setthenumberoftimespresenceofmediawillbechecked.Usethe<+>or<->to
adjust the value. The values range from 1 to 50.
4.4.14 CSM (Compatibility Support Module)
Launch CSM [Disabled]
This option allows you to enable or disable CSM Support.
[Disabled] DisabletheCSMtofullysupporttheWindowssecureupdateandsecure
boot.
[Enabled] Forabettercompatibility,enabletheCSMtofullysupportthenon-UEFI
driver add-on devices or the Windows UEFI mode.
The following items appear only when
Launch CSM
to
[Enabled]
.
GateA20 Active [Upon Request]
This allows you to set the GA20 option.
[UponRequest] GA20canbedisabledusingBIOSservices.
[Always] DonotallowdisablingGA20;thisoptionisusefulwhenanyRTcodeis
executed above 1MB.
Interrupt 19 Capture [Immediate]
Allows you to select the BIOS reaction on INT19 trapping by Option ROM.
[Immediate] Executethetraprightaway.
[Postponed] Executethetrapduringlegacyboot.
[Auto] Auto
Boot Device Control [UEFI only]
Allowsyoutoselectthedevicesboot-upmodeaccordingtothedevicesspecication.Devices
with the selected mode will in the boot priority list.
Congurationoptions:[UEFIandLegacyOPROM][LegacyOPROMonly][UEFIonly]