User Manual

Table Of Contents
ASUS TS100-E11-PI4
4-33
ECC Support [Enabled]
Allows you to enable or disable the DDR Ecc support.
Congurationoptions:[Disabled][Enabled]
DDR Speed Control [Auto]
Allows you to set DDR Frequency and Gear1 / Gear2 control for all SAGV points.
Congurationoptions:[Auto][Manual]
Memory Scrambler [Enabled]
Allows you to enable or disable Memory Scrambler support.
Congurationoptions:[Disabled][Enabled]
Fast Boot [Disabled]
Allows you to enable or disable fast path thru the MRC.
Congurationoptions:[Disabled][Enabled]
Graphics Configuration
Primary Display [Auto]
Allows you to select which of CPU Graphics / PEG Graphics / PCIE Graphics device
should be Primary Display.
Congurationoptions:[Auto][CPUGraphics][PCI][HG]
Select PCIE Card [Auto]
Allows you to select the card used on the platform.
[Auto] SkipGPIObasedPowerEnabletodGPU.
[ElkCreek4] DGPUPowerEnable=ActiveLow.
[PEGEval] DGPUPowerEnable=ActiveHigh.
HG Delay After Power Enable [300]
The delay in milli-seconds after power enable.
HG Delay After Hold Reset [100]
The delay in milli-seconds after hold reset.
Internal Graphics [Auto]
Keep IGFX enabled based on the setup options.
Congurationoptions:[Auto][Disabled][Enabled]
VT-d [Enabled]
Allows you to enable or disable VT-d capability.
Congurationoptions:[Disabled][Enabled]
X2APIC OPT Out [Disabled]
Allows you to enable or disable X2APIC_OPT_OUT bit.
Congurationoptions:[Disabled][Enabled]
DMA Control Guarantee [Disabled]
Allows you to enable or disable DMA_CONTROL_GUARANTEE bit.
Congurationoptions:[Disabled][Enabled]
IGD VTD Enable [Enabled]
Allows you to enable or disable IGD VTD.
Congurationoptions:[Disabled][Enabled]