User Manual

4-38
Chapter 4: BIOS Setup
Spin Up Device [Disabled]
AllowsyoutoenableordisableSpinUpDevice.Ifenabledforanyoftheports,
Staggered Spin Up will be performed and only the drives which have this option
enabled will spin up at boot. Otherwise all drives spin up at boot.
Congurationoptions:[Disabled][Enabled]
SATA Device Type [Hard Disk Drive]
AllowsyoutoidentifytheSATAportisconnectedtoasolidstatedriveoraharddisk
drive
Congurationoptions:[HardDiskDrive][SolidStateDrive]
HD Audio Configuration
HD Audio [Enabled]
Allows you to control detection of the HD-Audio device.
[Disabled] HDAwillbeunconditionallydisabled.
[Enabled] HDAwillbeunconditionallyenabled.
The following items appear only when
HD Audio
is set to
[Enabled]
.
Audio DSP [Disabled]
Allows you to enable or disable Audio DSP.
Congurationoptions:[Disabled][Enabled]
The following item appears only when
Audio DSP
is set to
[Enabled]
.
Audio DSP Compliance Mode
Allows you to specify DSP enabled system compliance.
[Non-UAA(IntelSST)]   IntelSSTdriversupportonly-CC_040100.
[UAA(HDAInbox/IntelSST)] HDAudioInboxorIntelSSTdriversupport-
CC_040380.
HDA Link [Enabled]
Congurationoptions:[Disabled][Enabled]
DMIC #0 [Enabled]
Congurationoptions:[Disabled][Enabled]
The following item appears only when
DMIC #0
is set to
[Enabled]
.
Dmic Clock Source Select [ClkA]
Congurationoptions:[Both][ClkA][ClkB]
DMIC #1 [Enabled]
Congurationoptions:[Disabled][Enabled]
The following item appears only when
DMIC #1
is set to
[Enabled]
.
Dmic Clock Source Select [ClkA]
Congurationoptions:[Both][ClkA][ClkB]