User Manual

4-54
Chapter 4: BIOS Setup
4.11.4 BMC network configuration
Thesub-itemsinthiscongurationallowyoutoconguretheBMCnetworkparameters.
Configure IPV4 support
Lan channel 1 / Lan channel 2
Configuration Address source [Unspecified]
Allows you to set the LAN channel parameters statically or dynamically (by BIOS or by
BMC).
[Unspecified]
optionwillnotmodifyanyBMCnetworkparametersduringBIOS
phase.
Congurationoptions:[Unspecied][Static][DynamicBmcDhcp]
The following items are available only when
Configuration Address source
is set to
[Static]
.
Station IP address
Allows you to set the station IP address.
Subnet mask
Allowsyoutosetthesubnetmask.WerecommendthatyouusethesameSubnet
Maskyouhavespeciedontheoperatingsystemnetworkfortheusednetworkcard.
Router IP Address
Allows you to set the router IP address.
Toquicklygotothelastitemofthesecondpage,pressthe Page Down button. Press the
Page Upbuttontogobacktotherstitemintherstpage.
Navigate to the second page of the screen to see the rest of items in this menu by pressing
theUporDownarrowkeys.