TS100-E5/PI4 Configuration Guide
E4183 First Edition V1 September 2008 Copyright © 2008 ASUSTeK COMPUTER INC. All Rights Reserved. No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the purchaser for backup purposes, without the express written permission of ASUSTeK COMPUTER INC. (“ASUS”).
Contents Contents....................................................................................................... III Revision history........................................................................................... III Safety information....................................................................................... IV Chapter 1: Product introduction 1.1 Key features................................................................................... 1-2 1.
Safety information Electrical Safety • • • • Before installing or removing signal cables, ensure that the power cables for the system unit and all attached devices are unplugged. To prevent electrical shock hazard, disconnect the power cable from the electrical outlet before relocating the system. When adding or removing any additional devices to or from the system, contact a qualified service technician or your dealer.
This chapter describes the key features of TS100-E5/PI4. It includes the product overview and general specifications.
1.1 Key features TS100-E5/PI4 is a uni-processor pedestal server, supporting 45nm Quad-Core / Dual-Core Intel® Xeon® 3300 / 3200 / 3100 / 3000 series or Intel® Conroe-L 400 series platform and DDR2 800 / 667 un-buffered ECC memory. It´s ideal for SOHO & SMB due to its super quietness. Ultra-Quiet Working Environment With ASUS unique FAN control technology, TS100-E5/PI4 is able to adjust fan speed intelligently and run Quad-core CPU system at very low acoustic level (26.
1.2 System overview 2 1 3 5 4 Items Items 1. Central processing unit (CPU) 4. Hard disk drives 2. CPU heatsink and fan 5. ASUS RAID card (optional) 3.
1.3 Front panel features Optical Drive Empty 5.25-inch bay Floppy Disk Drive Power button Reset button Power LED HDD access LED USB 2.
1.4 Rear panel features Power supply switch* Power cord connector Power supply module PS/2 mouse port PS/2 keyboard port USB 2.0 ports Serial port VGA port 95mm system fan Gigabit LAN ports 1-4 Expansion slots * Adjust the appropriate system input voltage according to the voltage supply in your area.
1.5 System specifications Processor support FSB Core Logic Memory Storage RAID support NIC Onboard Gfx Expansion Slot Power Supply Dimension (L x W x H) Quad-Core Intel® Xeon® processor 3300 / 3200 series Dual-Core Intel® Xeon® processor 3100 / 3000 series Intel® Conroe-L 400 series 1333 / 1066 / 800 MHz Intel® 3200 MCH + Intel® ICH7R 4-DIMM support up to 8GB DDR2 800/667 un-buffered, ECC 4 x Internal SATAII HDD bays (Easy-Swap) 1 x 5.
This chapter lists the key components and optional accessories for the server system.
2.1 Upgrading CPU and CPU heatsink The ASUS TS100-E5/PI4 supports Intel® Xeon® Quad-core 3300/3200 series and Dual-core 3100/3000 series processor. 2 5 4 3 1 Order P/N 90-S000U02W0T 90-S000U02X0T 90-S000U02Y0T 90-S000U02V0T 90-S000U02E0T 90-S000U02F0T 90-S000U02G0T 90-S000U02H0T 90-S000U02I0T 90-S000U02J0T 90-S000U0160T 90-S000U0150T 2-2 Description Quad Core Intel Xeon X3360, 2.83G, FSB 1333, 12M L2 Quad Core Intel Xeon X3350, 2.66G, FSB 1333, 12M L2 Quad Core Intel Xeon X3320, 2.
2.2 Upgrading system memory The motherboard comes with four (4) Double Data Rate 2 (DDR2) Dual Inline Memory Modules (DIMM) sockets.
2.3 Upgrading hard disk drives The system supports four Serial ATA hard disk drives through screw-free hard disk drive holders. 1 2 1 We recommend that you install identical drives of the same model and capacity for RAID configuration. Order P/N 90-S000H5500T 90-S000H5400 90-S000H5300 90-S000H5000 2-4 Description 1TB, 3.5” SATAII HDD / ASUS 750GB, 3.5” SATAII HDD / ASUS 500GB, 3.5” SATAII HDD / ASUS 250GB, 3.
2.4 Installing ASUS RAID card The ASUS RAID card allows users to create RAID 0, 1, 5, 6 and 10 from SATA hard disk drives connected to the SATA connectors on the HDD backplane*. 1 SATA1 3 P0 SATA2 SATA3 SATA4 SATA5 P1 P2 P3 2 * If the system does not have the HDD backplane built in, please plug the data cable directly into HDD 7-pin connectors.
2.5 OS support list OS support list Windows® Server 2003 R2 Enterprise 32-bit Windows® Server 2003 R2 Enterprise 64-bit RedHat® Enterprise Linux AS 4.0 UP5 32-bit RedHat® Enterprise Linux AS 4.0 UP5 64-bit RedHat® Enterprise Linux AS 5.0 32-bit RedHat® Enterprise Linux AS 5.