Configuration Guide

ASUS TS500-E5 2-7
2.6 Installing ASUS PIKE 1078 module
The ASUS PIKE 1078 module allows users to create RAID 0, 1, 5, 6, 10, 50 and 60
from SAS hard disk drives connected to the SAS connectors on the motherboard.
Order P/N Description
90-C1SCN5-00UAY10Z ASUS PIKE 1078 8-port SAS RAID Module (Support Hardware
RAID 0, 1, 5, 6, 10, 50, 60)
A. Insert the PIKE module into the PIKE card slot.
B. Connect the SAS cables to the SAS connectors on the motherboard and SATAII/SAS
backplane board*.
C. Install the iButton**.
D. Ensure that the jumper caps are placed on pins 1–2 of the IBTN_SEL1 jumper.
* The connectors 9–12 are used for transferring SGPIO signals. Ensure to connect the
connectors 9 between the two backplanes when installing the second HDD cage. Refer to
user manual for details.
** PIKE 1078 module won’t function if the iButton is not installed.
A
C
4
9
9
3
2
1
8
7
6
5
10
10
11
12
11
12
4
3
2
1
7
6
5
A
B
B
13
13
D
5
6
7
4
3
2
1
4
3
2
1
8
7
6
5