User's Manual

Chapter 2: Hardware setup
2-18
2.6.3 Installing a hot-swap SATA/SAS hard disk drive
1. Releaseadrivetraybypushingthe
springlocktotheright,andthenpulling
the tray lever outward. The drive tray
ejects slightly after you pull out the lever.
2. Firmlyholdthetrayleverandpullthe
drivetrayoutofthebay.
3. Takenoteofthedrivetrayholes.Each
sidehasthreeholestotdifferenttypes
ofharddiskdrives.Usetwoscrewson
eachsidetosecuretheharddiskdrive.