User's Manual

Chapter 2: Hardware setup
2-20
2.6.4 Removing and reinstalling the backplane
DONOTremovethebackplaneunlessnecessary!
1. Removeallhot-swapHDDtraysfromthe
chassis.
2. DisconnectallcablesfromtheSATA/
SASbackplane.
3. Loosen the four screws on the
backplane.
4. Firmlyholdthebackplane,liftitupand
remove it from the module.
5. Followthepreviousinstructionsin
reversetoreinstallthebackplane