User's Manual

Chapter 2: Hardware setup
2-26
Back side
ThebacksideoftheSATA/SASbackplanefacestherearpanelwheninstalled.Thisside
includesthepowerconnectorsandSATA/SASinterfacesforthemotherboardSerialATA
connectorsortheSAScard.
SGPIO1
SGPIO2
BPSMB1
U1
CON1
CON2
CON3
CON4
SGPIO_SEL1
SGPIO3
Connectors Description
SGPIO1
ConnectstoSATASGPIO1connectoronthemotherboard
SGPIO2
ConnectstoSASPSGPIO1connectoronthemotherboard
SGPIO3
ConnectstoSASPSGPIO2connectoronthemotherboard
BPSMB1
ConnectstoFrontpanelSMBconnectoronthemotherboard
U1
Connects to 4-pin plug of the power supply
CON1/CON2/
CON3/CON4
ConnectstoSATA/SASconnectorsonthemotherboard
MovetheSGPIO_SEL1jumperontheSATA/SASbackplaneto2–3wheninstallingthe
PIKERAIDcard.