User's Manual

Chapter 4: Motherboard information
4-4
Layout contents
Jumpers
Page
1. Clear RTC RAM (CLRTC1) 4-5
2. VGA controller setting (3-pin VGA_SW1) 4-6
3. LAN controller setting (3-pin LAN_SW1, LAN_SW2) 4-6
4. MErmwareforcerecoverysetting(3-pinME_RCVR1) 4-7
5. DDR4thermaleventsetting(3-pinDIMMTRIP1) 4-7
6. RAIDcongurationutilityselection(3-pinRAID_SEL1) 4-8
7. PMBus1.2PSUselectjumper(3-pinSMART_PSU1)
4-8
Slots/Sockets Page
1. CPUsockets 2-4
2. DDR4sockets 2-9
3. PCIExpressx16/PCIExpressx8 4-17
Internal connectors
Page
1. Serial ATA 6.0 Gbps connectors (7-pin SATA1, SATA2, SATA3, SATA4,
 SATA5,SATA6[LightBlue]);(7-pinSSATA1,SSATA2,SSATA3[Gray],
 SSATA4[LightGray])
4-9
2. M.2 (NGFF) connector (NGFF1) 4-10
3. PowerSupplySMBusconnector(5-pinPSUSMB1) 4-10
4. USB2.0connector(10-1pinUSB34)
4-11
5. USB3.0connector(20-1pinUSB3_34) 4-11
6. CPU, front, and rear fan connectors (4-pin CPU_FAN1, CPU_FAN2,
FRNT_FAN1, FRNT_FAN2, FRNT_FAN3, FRNT_FAN4, FRNT_FAN5,
REAR_FAN1, REAR_FAN2)
4-12
7. Serial port connector (10-1 pin COM1) 4-13
8. TrustedPlatformModuleconnector(20-1pinTPM1) 4-13
9. ATX power connectors(24-pin EATXPWR1, 8-pin EATX12V1, 8-pin
EATX12V2)
4-14
10. Systempanelconnector(20-1pinPANEL1) 4-15
11. Auxiliarypanelconnector(20-2pinAUX_PANEL1) 4-16
12. HarddiskactivityLEDconnector(4-pinHDLED1)
4-17
13. ChassisIntrusionconnector(2-pinINTRUSION1) 4-17
Onboard LEDs Page
1. StandbyPowerLED(SB_PWR1) 4-18
2. BaseboardManagementControllerLED(BMC_LED1) 4-18
3. CPUWarningLED(ERR_CPU1,ERR_CPU2) 4-19
4. CATT LED (CATTERR_LED1) 4-19
5. Q-Code LEDs (LED1)
4-20