User's Manual

TS700-E7/RS8
6-5
Chapter 6
6.2.1 Creating a RAID set




Using Easy Conguration
To create a RAID set using the Easy Conguration option:
1. From the Management Menu, select Congure > Easy Conguration, and
press <Enter>.
LSI Software RAID Conguration Utility Ver C.05 Sep 17, 2010
BIOS Version A.10.09231523R
Use Cursor Keys to Navigate Between Items And Press Enter To Select An Option
Management Menu
Congure
Initialize
Objects
Rebuild
Check Consistency
Denes Physical Arrays. An Array Will Automatically Become A VD
Conguration Menu
Easy Conguration
New Conguration
View/Add Conguration
Clear Conguration
Select Boot Drive
2. The ARRAY SELECTION MENU displays the available drives connected to
the SATA ports. Use the up/down arrow keys to select the drives you want
to include in the RAID set, and then press <Space>. When selected, the
drive indicator changes from READY to ONLIN A[X]-[Y], where X is the array
number, and Y is the drive number.
LSI Software RAID Conguration Utility Ver C.05 Sep 17, 2010
BIOS Version A.10.09231523R
SPACE-Sel,ENTER-EndArray,F10-Congure,F2-Drive Info,F3-Virtual Drives,F4-HSP
Management Menu
Congure
Initialize
Objects
Rebuild
Check Consistency
Port # 2 DISK 74.74GB HDS728080PLA380 05.01C05
0
Easy Conguration - ARRAY SELECTION MENU
PORT #
1
2
3
ONLIN A00-00
ONLIN A00-01
READY
READY