User Manual

Chapter 2: Hardware setup
2-6
9. Gentlypushtheloadplatejustenough
to let it sit on top of the CPU.
Do not force to close the load plate
as it may damage the CPU.
4. Push the left load lever to slightly lift the
loadplate(G).
Do not insert the load lever into the
retentiontab.
TheCPUtsinonlyonecorrect
orientation. DO NOT force the CPU
intothesockettopreventbendingthe
CPU pins on the socket.
6. GettheCPU.
7. AlignandpositiontheCPUoverthe
socket ensuring that the triangle mark on
the CPU matches the triangle mark on
thesocketbox.
5. Holdtheedgethengentlylifttheload
plate(H).
8. InstalltheCPUintotheslot.
Edge of the
Load plate
Load plate
Triangle mark