User Manual

Chapter 2: Hardware setup

2-26

2.8 Cable connections

• Thebundledsystemcablesarepre-connectedbeforeshipment.Youdonotneedto

disconnectthesecablesunlessyouwillremovepre-installedcomponentstoinstall

additional devices.

• RefertoChapter4fordetailedinformationontheconnectors.

2.8.1 Motherboard connections

Standard cables connected to the motherboard

1. 24-pinATXpowerconnector(frompowersupplytomotherboard)

2. 8-pin12Vpowerconnector(frompowersupplytomotherboard)

3. Systemfanconnector(fromsystemfantomotherboard)

4. USB3.0connector(frommotherboardtofrontI/Oboard)

5. USB2.0connector(frommotherboardtofrontI/Oboard)

6. SATAconnector(systemdefault;frommotherboardtofront3.5-inchSATA/SAS

backplane)

7. SSATAconnector(systemdefault;frommotherboardtoopticaldriveorrear2.5-inch

SATA/SASbackplane)

8. Systemauxiliarypanelconnector(frommotherboardtofrontI/Oboard)

9. Systempanelconnector(frommotherboardtofrontI/Oboard)